{"title":"Wood Preservatives\/Enhancement","description":"\u003cp\u003eWe stock a range of wood varnishes, stains and preservatives for the treatment of your wood. Keep your fence looking fresh and new with some of our wood stains.\u003c\/p\u003e","products":[{"product_id":"ronseal-decking-oil-5ltr-natural-cedar","title":"5 Litre Natural Pine Ronseal Ultimate Protection Decking Oil","description":"\u003cp\u003e\u003cspan style=\"font-size: 12px;\"\u003eCOVERAGE\u003c\/span\u003e\u003cbr\u003eA 5 litre pack is normally sufficient to coat a deck 20-24m² with 2 coats of Decking Oil. Coverage will vary with absorbency of timber and profile of deck.\u003c\/p\u003e\u003cp\u003eAreas of use: Hardwood and soft wood decking.\u003cbr\u003eApprox coverage: 10 m2 covered per litre.\u003cbr\u003eApprox number of coats: 2.\u003cbr\u003eFinish: Semi transluscent matt.\u003cbr\u003eApplication: Brush. \u003cbr\u003eDrying time approx: 2 hours.\u003cbr\u003eProtection level: Medium.\u003c\/p\u003e\u003cp\u003eAvailable in 2 Size; 5 Litre. \u003cbr\u003eAvailable in Various Shades.\u003c\/p\u003e\u003cp\u003eThe Ronseal RSLDONC25L is supplied in a tin with re-sealable lid and easy pour handle.\u003c\/p\u003e\u003cp\u003eFinish: Natural Cedar\u003c\/p\u003e\u003cp\u003eSize: 5 Litre\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003cspan\u003eRonseal Decking Oil is a durable scuff resistant tinted oil that forms a waterproof barrier to protect against weathering, warping, swelling, drying and splitting. It resists mould and algae growth and its fade resistant finish protects against UV rays. For use on hardwood and softwood decking.\u003c\/span\u003e\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":46416844357920,"sku":"rons026.2","price":49.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0789\/7051\/9840\/products\/decking-oil_8.jpg?v=1692817208"},{"product_id":"ronseal-decking-oil-5ltr-natural-oak","title":"5 Litre Natural Oak Ronseal Ultimate Protection Decking Oil","description":"\u003cp\u003eCOVERAGE\u003cbr\u003eA 5 litre pack is normally sufficient to coat a deck 20-24m² with 2 coats of Decking Oil. Coverage will vary with absorbency of timber and profile of deck.\u003c\/p\u003e\u003cp\u003eAreas of use: Hardwood and soft wood decking.\u003cbr\u003eApprox coverage: 10 m2 covered per litre.\u003cbr\u003eApprox number of coats: 2.\u003cbr\u003eFinish: Semi transluscent matt.\u003cbr\u003eApplication: Brush. \u003cbr\u003eDrying time approx: 2 hours.\u003cbr\u003eProtection level: Medium.\u003c\/p\u003e\u003cp\u003eAvailable in Size:; 5 Litre. \u003cbr\u003eAvailable in Various Shades.\u003c\/p\u003e\u003cp\u003eThe Ronseal RSLDONO25L is supplied in a tin with re-sealable lid and easy pour handle.\u003c\/p\u003e\u003cp\u003eFinish: Natural Oak\u003c\/p\u003e\u003cp\u003eSize: 5 Litre\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003cspan\u003eRonseal Decking Oil is a durable scuff resistant tinted oil that forms a waterproof barrier to protect against weathering, warping, swelling, drying and splitting. It resists mould and algae growth and its fade resistant finish protects against UV rays. For use on hardwood and softwood decking.\u003c\/span\u003e\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":46416846520608,"sku":"rons026.3","price":49.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0789\/7051\/9840\/products\/decking-oil_7.jpg?v=1692817211"},{"product_id":"ronseal-decking-cleaner-5ltr","title":"5 Litre Ronseal Decking Cleaner","description":"\u003cp\u003e\u003cspan\u003eCOVERAGE\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eA 5 litre pack is sufficient to clean a deck equivalent to 20-24 square metres in area\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp\u003e\u003cspan\u003eRonseal Decking Cleaner cleans and revives timber decking, removing dirt, grease, fungus, stains, algae and mildew. It opens the pores of the wood allowing maximum adhesion of coatings for a lasting finish. Ideal for use prior to applying a decking finish.\u003c\/span\u003e\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":46416851632416,"sku":"rons028.5","price":17.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0789\/7051\/9840\/products\/decking-cleaner-and-reviver.jpg?v=1692817416"},{"product_id":"creocote-wood-treatment-4l-dark","title":"4 Litre Dark Brown Creocote Substitute Wood Treatment","description":"\u003cp\u003eWE'RE SORRY BUT WE CAN'T CURRENTLY SHIP THIS PRODUCT OUTSIDE OF THE NORTHWEST.\u003c\/p\u003e\u003cp\u003ePreparation:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12px;\"\u003eThe wood to be treated should be thoroughly dry\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12px;\"\u003eApply Creocote liberally. Can be applied by brush, medium pile small roller, spray or dipped\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12px;\"\u003eExtra penetration can be achieved by standing timber in Creocote overnight. This is especially useful for post ends that will be buried\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12px;\"\u003ePatch match each can before application\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12px;\"\u003eA coat of Creocote every 1-2 years will help to give wood considerable life\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12px;\"\u003eCan be applied over previously creosoted or wood treatment coated timber\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cspan\u003eCreocote the modern alternative to traditional creocote. It is an H.S.E. approved wood preservative and can be used on all exterior rough cut timber in the same way that creocote was ie; fences, sheds, lattice work etc.\u003c\/span\u003e\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":46416972775712,"sku":"156","price":11.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0789\/7051\/9840\/products\/1358500989-4134.jpg?v=1692818654"},{"product_id":"creocote-wood-treatment-4l-light","title":"4 Litre Light Brown Creocote Substitute Wood Treatment","description":"\u003cp\u003eWE'RE SORRY BUT WE CAN'T CURRENTLY SHIP THIS PRODUCT OUTSIDE OF THE NORTHWEST.\u003c\/p\u003e\u003cp\u003ePreparation:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12px;\"\u003eThe wood to be treated should be thoroughly dry\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12px;\"\u003eApply Creocote liberally. Can be applied by brush, medium pile small roller, spray or dipped\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12px;\"\u003eExtra penetration can be achieved by standing timber in Creocote overnight. This is especially useful for post ends that will be buried\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12px;\"\u003ePatch match each can before application\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12px;\"\u003eA coat of Creocote every 1-2 years will help to give wood considerable life\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan style=\"font-size: 12px;\"\u003eCan be applied over previously creosoted or wood treatment coated timber\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003e\u003cp\u003e\u003cspan\u003eCreoceal the modern alternative to traditional creocote. It is an H.S.E. approved wood preservative and can be used on all exterior rough cut timber in the same way that creocote was ie; fences, sheds, lattice work etc.\u003c\/span\u003e\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":46416972808480,"sku":"157","price":11.88,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0789\/7051\/9840\/products\/1358501040-7064.jpg?v=1692818656"},{"product_id":"johnstones-shed-and-fence-treatment-5-0ltr-acorn-gold","title":"5 Litre Acorn Gold Johnstones Shed \u0026 Fence Treatment","description":"\u003cul\u003e\u003cli\u003ePREPARATION \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cspan\u003eEnsure all timber is clean, dry and free from surface coatings, such as paint, varnish or polish. If the timber is affected by mould, lichen, algae or moss, use a fungicidal pre-treatment prior to application of Shed and Fence Treatment. \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eFor additional information and free Johnstone's Trade datasheets call 01924 354000 or visit www.johnstone's-paint.co.uk. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAPPLICATION \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cspan\u003eStir Shed \u0026amp; Fence Treatment well before and during use. Whilst applying ensure gloves are worn to avoid staining hands. Brush liberally and evenly onto exposed surfaces. Wash off any splashes on plants otherwise the foliage may be stained. One coat is required on sound new timber. Old weathered timber or porous timber may require two coats. Do not apply to wet wood, or in temperatures below 5 degrees Centigrade or when rain is imminent. Wear a suitable face mask when creating dust. Special precautions should be taken during surface preparation of pre-1960's paint surfaces over wood and metal as they may contain harmful lead. PLEASE NOTE: The final colour will depend on the colour and porosity of the surface. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCOVERAGE \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cspan\u003eShed \u0026amp; Fence Treatment will cover approximately 6 square metres per litre on rough sawn timber and approximately 12 square metres per litre on planed timber. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDRYING TIME \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cspan\u003eAllow 2-4 hours between coats. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAFTER USE \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cspan\u003eRemove as much product as possible from brushes before cleaning. Brushes should be washed immediately after use in warm soapy water and rinse thoroughly. Replace lid firmly. Some local authorities have special facilities for the disposal of waste coatings. Do not empty product into drains or watercourses. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eGENERAL INFORMATION \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cspan\u003eTo avoid the risk of spillage, always store and transport in a secure upright position. \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ePROTECT FROM FROST\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eJOHNSTONE'S SHED \u0026amp; FENCE TREATMENT is formulated to be water repellent and resist fading. Suitable for above ground rough sawn timber, this special formulation protects exterior timber from the suns harmful UV rays.\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":46416972841248,"sku":"158","price":11.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0789\/7051\/9840\/products\/1358429339-2088.jpg?v=1692818658"},{"product_id":"langlow-wood-preserver-1-ltr-dark-brown","title":"1 Litre Dark Brown Langlow Wood Preserver","description":"\u003cp\u003e\u003cspan\u003eWE'RE SORRY BUT WE CAN'T CURRENTLY SHIP THIS PRODUCT OUTSIDE OF THE NORTHWEST.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eGOLDEN BROWN and DARK BROWN are more refined wood preservers than the coal tar products and give rich brown finishes to fencing, garages, portable buildings, etc. Very effective against wet rot, fungi and decay.\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eDIRECTIONS FOR USE OF LANGLOW WOOD PRESERVER PRODUCTS\u003cbr\u003eAgitate the contents of the can thoroughly before use and ensure that the wood to be treated is clean, dry and free from surface coatings such as paint, polish, and bark, etc. End grain should be treated to saturation. Allow wood to dry between application coats. After treatment, wood when dry can be painted, varnished or polished. Coverage depends upon surface finish, porosity of substrate, etc., but as a guide should be approximately 4-6 metres squared per litre. Clean brushes, spray equipment, etc. with Langlow White Spirit.\u003c\/p\u003e\u003cp\u003eLANGLOW CLEAR, RED CEDAR, GOLDEN BROWN, PALE GREEN, GREEN and DARK BROWN wood preservers can be applied by brush, spray, or dipping whereby 2 coats should be applied to refusal in each case.\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":46416973070624,"sku":"160","price":15.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0789\/7051\/9840\/products\/wood-pres-clear_l-298x373_2_5_1.png?v=1692818662"},{"product_id":"langlow-wood-preserver-1-ltr-golden-brown","title":"1 Litre Light Brown Langlow Wood Preserver","description":"\u003cp class=\"supplementalInfo\"\u003eWE'RE SORRY BUT WE CAN'T CURRENTLY SHIP THIS PRODUCT OUTSIDE OF THE NORTHWEST.\u003c\/p\u003e\u003cp class=\"supplementalInfo\"\u003eGOLDEN BROWN and DARK BROWN are more refined wood preservers than the coal tar products and give rich brown finishes to fencing, garages, portable buildings, etc. Very effective against wet rot, fungi and decay.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eDIRECTIONS FOR USE OF LANGLOW WOOD PRESERVER PRODUCTS\u003cbr\u003eAgitate the contents of the can thoroughly before use and ensure that the wood to be treated is clean, dry and free from surface coatings such as paint, polish, and bark, etc. End grain should be treated to saturation. Allow wood to dry between application coats. After treatment, wood when dry can be painted, varnished or polished. Coverage depends upon surface finish, porosity of substrate, etc., but as a guide should be approximately 4-6 metres squared per litre. Clean brushes, spray equipment, etc. with Langlow White Spirit.\u003c\/p\u003e\u003cp\u003eLANGLOW CLEAR, RED CEDAR, GOLDEN BROWN, PALE GREEN, GREEN and DARK BROWN wood preservers can be applied by brush, spray, or dipping whereby 2 coats should be applied to refusal in each case.\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":46416973168928,"sku":"161","price":15.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0789\/7051\/9840\/products\/wood-pres-clear_l-298x373_2_5_2.png?v=1692818570"},{"product_id":"langlow-wood-preserver-1-ltr-green","title":"1 Litre Dark Green Langlow Wood Preserver","description":"\u003cp\u003e\u003cspan\u003eWE'RE SORRY BUT WE CAN'T CURRENTLY SHIP THIS PRODUCT OUTSIDE OF THE NORTHWEST.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eGREEN is a copper Naphthenate formulation, primarily for horticultural application, where Creosote type preservatives cannot be used without risk. Harmless to plant life when dry.\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eDIRECTIONS FOR USE OF LANGLOW WOOD PRESERVER PRODUCTS\u003cbr\u003eAgitate the contents of the can thoroughly before use and ensure that the wood to be treated is clean, dry and free from surface coatings such as paint, polish, and bark, etc. End grain should be treated to saturation. Allow wood to dry between application coats. After treatment, wood when dry can be painted, varnished or polished. Coverage depends upon surface finish, porosity of substrate, etc., but as a guide should be approximately 4-6 metres squared per litre. Clean brushes, spray equipment, etc. with Langlow White Spirit.\u003c\/p\u003e\u003cp\u003eLANGLOW CLEAR, RED CEDAR, GOLDEN BROWN, PALE GREEN, DARK GREEN and DARK BROWN wood preservers can be applied by brush, spray, or dipping whereby 2 coats should be applied to refusal in each case.\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":46416973463840,"sku":"162","price":15.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0789\/7051\/9840\/products\/wood-pres-clear_l-298x373_2_5_3.png?v=1692818572"},{"product_id":"langlow-wood-preserver-1-ltr-red-cedar","title":"1 Litre Red Cedar Langlow Wood Preserver","description":"\u003cp\u003e\u003cspan\u003eWE'RE SORRY BUT WE CAN'T CURRENTLY SHIP THIS PRODUCT OUTSIDE OF THE NORTHWEST.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eLANGLOW RED CEDAR treats and restores cedarwood to its original rich appearance. It acts both as a water repellant and protects against rot. Can also be used on other light coloured timber to give an effective finish.\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eDIRECTIONS FOR USE OF LANGLOW WOOD PRESERVER PRODUCTS\u003cbr\u003eAgitate the contents of the can thoroughly before use and ensure that the wood to be treated is clean, dry and free from surface coatings such as paint, polish, and bark, etc. End grain should be treated to saturation. Allow wood to dry between application coats. After treatment, wood when dry can be painted, varnished or polished. Coverage depends upon surface finish, porosity of substrate, etc., but as a guide should be approximately 4-6 metres squared per litre. Clean brushes, spray equipment, etc. with Langlow White Spirit.\u003c\/p\u003e\u003cp\u003eLANGLOW CLEAR, RED CEDAR, GOLDEN BROWN, PALE GREEN, GREEN and DARK BROWN wood preservers can be applied by brush, spray, or dipping whereby 2 coats should be applied to refusal in each case.\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":46416974151968,"sku":"164","price":15.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0789\/7051\/9840\/products\/wood-pres-clear_l-298x373_2_5_10.png?v=1692818664"},{"product_id":"langlow-wood-preserver-1-ltr-universal-1","title":"1 Litre Universal Langlow Wood Preserver","description":"\u003cp\u003e\u003cspan\u003eWE'RE SORRY BUT WE CAN'T CURRENTLY SHIP THIS PRODUCT OUTSIDE OF THE NORTHWEST.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eLANGLOW UNIVERSAL wood preserver can be applied by brush, spray or dipping as follows: To treat DRY ROT and WET ROT, remove cause of dampness and affected wood at least 1 metre beyond attack. Apply 2-3 liberal coats to all remaining and replacement wood. To treat WOOD BORING INSECT attack, apply 2-3 liberal coats and inject into flight holes in wood. To protect sound wood against future attack, apply 3 liberal coats or dip wood for a few minutes to achieve maximum penetration. For wood in ground, such as fence posts, soak for at least 1 hour. Wood treated with Langlow Universal is water repellent when dry.\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eDIRECTIONS FOR USE OF LANGLOW WOOD PRESERVER PRODUCTS\u003cbr\u003eAgitate the contents of the can thoroughly before use and ensure that the wood to be treated is clean, dry and free from surface coatings such as paint, polish, and bark, etc. End grain should be treated to saturation. Allow wood to dry between application coats. After treatment, wood when dry can be painted, varnished or polished. Coverage depends upon surface finish, porosity of substrate, etc., but as a guide should be approximately 4-6 metres squared per litre. Clean brushes, spray equipment, etc. with Langlow White Spirit.\u003c\/p\u003e\u003cp\u003eLANGLOW CLEAR, RED CEDAR, GOLDEN BROWN, PALE GREEN, GREEN and DARK BROWN wood preservers can be applied by brush, spray, or dipping whereby 2 coats should be applied to refusal in each case.\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":46416974217504,"sku":"165","price":15.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0789\/7051\/9840\/products\/wood-pres_l_2.jpg?v=1692818666"},{"product_id":"langlow-wood-preserver-5-ltr-dark-brown","title":"5 Litre Dark Brown Langlow Wood Preserver","description":"\u003cp\u003eWE'RE SORRY BUT WE CAN'T CURRENTLY SHIP THIS PRODUCT OUTSIDE OF THE NORTHWEST.\u003c\/p\u003e\u003cp\u003eGOLDEN BROWN \u0026amp; DARK BROWN are more refined wood preservers than the coal tar products and give rich brown finishes to fencing, garages, portable buildings, etc. Very effective against wet rot, fungi and decay.\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eDIRECTIONS FOR USE OF LANGLOW WOOD PRESERVER PRODUCTS\u003cbr\u003eAgitate the contents of the can thoroughly before use and ensure that the wood to be treated is clean, dry and free from surface coatings such as paint, polish, and bark, etc. End grain should be treated to saturation. Allow wood to dry between application coats. After treatment, wood when dry can be painted, varnished or polished. Coverage depends upon surface finish, porosity of substrate, etc., but as a guide should be approximately 4-6 metres squared per litre. Clean brushes, spray equipment, etc. with Langlow White Spirit.\u003c\/p\u003e\u003cp\u003eLANGLOW CLEAR, RED CEDAR, GOLDEN BROWN, PALE GREEN, GREEN and DARK BROWN wood preservers can be applied by brush, spray, or dipping whereby 2 coats should be applied to refusal in each case.\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":46416978870560,"sku":"176","price":46.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0789\/7051\/9840\/products\/wood-pres-clear_l-298x373_2_5_4_1.png?v=1692818583"},{"product_id":"langlow-wood-preserver-5-ltr-golden-brown","title":"5 Litre Light Brown Langlow Wood Preserver","description":"\u003cp\u003e\u003cspan\u003eWE'RE SORRY BUT WE CAN'T CURRENTLY SHIP THIS PRODUCT OUTSIDE OF THE NORTHWEST.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eGOLDEN BROWN \u0026amp; DARK BROWN are more refined wood preservers than the coal tar products and give rich brown finishes to fencing, garages, portable buildings, etc. Very effective against wet rot, fungi and decay.\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eDIRECTIONS FOR USE OF LANGLOW WOOD PRESERVER PRODUCTS\u003cbr\u003eAgitate the contents of the can thoroughly before use and ensure that the wood to be treated is clean, dry and free from surface coatings such as paint, polish, and bark, etc. End grain should be treated to saturation. Allow wood to dry between application coats. After treatment, wood when dry can be painted, varnished or polished. Coverage depends upon surface finish, porosity of substrate, etc., but as a guide should be approximately 4-6 metres squared per litre. Clean brushes, spray equipment, etc. with Langlow White Spirit.\u003c\/p\u003e\u003cp\u003eLANGLOW CLEAR, RED CEDAR, GOLDEN BROWN, PALE GREEN, GREEN and DARK BROWN wood preservers can be applied by brush, spray, or dipping whereby 2 coats should be applied to refusal in each case.\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":46416979362080,"sku":"177","price":46.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0789\/7051\/9840\/products\/wood-pres-clear_l-298x373_2_5_3_1.png?v=1692818585"},{"product_id":"langlow-wood-preserver-5-ltr-green","title":"5 Litre Dark Green Langlow Wood Preserver","description":"\u003cp\u003e\u003cspan\u003eWE'RE SORRY BUT WE CAN'T CURRENTLY SHIP THIS PRODUCT OUTSIDE OF THE NORTHWEST.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eGREEN is a copper Naphthenate formulation, primarily for horticultural application, where Creosote type preservatives cannot be used without risk. Harmless to plant life when dry.\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eDIRECTIONS FOR USE OF LANGLOW WOOD PRESERVER PRODUCTS\u003cbr\u003eAgitate the contents of the can thoroughly before use and ensure that the wood to be treated is clean, dry and free from surface coatings such as paint, polish, and bark, etc. End grain should be treated to saturation. Allow wood to dry between application coats. After treatment, wood when dry can be painted, varnished or polished. Coverage depends upon surface finish, porosity of substrate, etc., but as a guide should be approximately 4-6 metres squared per litre. Clean brushes, spray equipment, etc. with Langlow White Spirit.\u003c\/p\u003e\u003cp\u003eLANGLOW CLEAR, RED CEDAR, GOLDEN BROWN, PALE GREEN, GREEN and DARK BROWN wood preservers can be applied by brush, spray, or dipping whereby 2 coats should be applied to refusal in each case.\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":46416979394848,"sku":"178","price":46.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0789\/7051\/9840\/products\/wood-pres-clear_l-298x373_2_5_2_1.png?v=1692818587"},{"product_id":"langlow-wood-preserver-5-ltr-red-cedar","title":"5 Litre Red Cedar Langlow Wood Preserver","description":"\u003cp\u003e\u003cspan\u003eWE'RE SORRY BUT WE CAN'T CURRENTLY SHIP THIS PRODUCT OUTSIDE OF THE NORTHWEST.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eLANGLOW RED CEDAR treats and restores cedarwood to its original rich appearance. It acts both as a water repellant and protects against rot. Can also be used on other light coloured timber to give an effective finish.\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eDIRECTIONS FOR USE OF LANGLOW WOOD PRESERVER PRODUCTS\u003cbr\u003eAgitate the contents of the can thoroughly before use and ensure that the wood to be treated is clean, dry and free from surface coatings such as paint, polish, and bark, etc. End grain should be treated to saturation. Allow wood to dry between application coats. After treatment, wood when dry can be painted, varnished or polished. Coverage depends upon surface finish, porosity of substrate, etc., but as a guide should be approximately 4-6 metres squared per litre. Clean brushes, spray equipment, etc. with Langlow White Spirit.\u003c\/p\u003e\u003cp\u003eLANGLOW CLEAR, RED CEDAR, GOLDEN BROWN, PALE GREEN, GREEN and DARK BROWN wood preservers can be applied by brush, spray, or dipping whereby 2 coats should be applied to refusal in each case.\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":46416979853600,"sku":"180","price":46.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0789\/7051\/9840\/products\/wood-pres-clear_l-298x373_2_5_4.png?v=1692818678"},{"product_id":"langlow-wood-preserver-5-ltr-universal","title":"5 Litre Universal Langlow Wood Preserver","description":"\u003cp\u003e\u003cspan\u003eWE'RE SORRY BUT WE CAN'T CURRENTLY SHIP THIS PRODUCT OUTSIDE OF THE NORTHWEST.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cspan\u003eLANGLOW UNIVERSAL wood preserver can be applied by brush, spray or dipping as follows: To treat DRY ROT and WET ROT, remove cause of dampness and affected wood at least 1 metre beyond attack. Apply 2-3 liberal coats to all remaining and replacement wood. To treat WOOD BORING INSECT attack, apply 2-3 liberal coats and inject into flight holes in wood. To protect sound wood against future attack, apply 3 liberal coats or dip wood for a few minutes to achieve maximum penetration. For wood in ground, such as fence posts, soak for at least 1 hour. Wood treated with Langlow Universal is water repellent when dry.\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eDIRECTIONS FOR USE OF LANGLOW WOOD PRESERVER PRODUCTS\u003cbr\u003eAgitate the contents of the can thoroughly before use and ensure that the wood to be treated is clean, dry and free from surface coatings such as paint, polish, and bark, etc. End grain should be treated to saturation. Allow wood to dry between application coats. After treatment, wood when dry can be painted, varnished or polished. Coverage depends upon surface finish, porosity of substrate, etc., but as a guide should be approximately 4-6 metres squared per litre. Clean brushes, spray equipment, etc. with Langlow White Spirit.\u003c\/p\u003e\u003cp\u003eLANGLOW CLEAR, RED CEDAR, GOLDEN BROWN, PALE GREEN, GREEN and DARK BROWN wood preservers can be applied by brush, spray, or dipping whereby 2 coats should be applied to refusal in each case.\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":46416980050208,"sku":"181","price":46.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0789\/7051\/9840\/products\/wood-pres_l.jpg?v=1692818680"},{"product_id":"ronseal-decking-end-grain-preserver-750ml","title":"750 ml Green Ronseal Decking End Grain Preserve","description":"\u003cul\u003e\u003cli\u003ePREPARATION\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eEnsure all surfaces are clean, dry and free from dust, mildew, algae, oil deposits or other material which may interfere with the penetration of the preserver.\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAPPLICATION AND DRY TIMES\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eBrush apply 1 litre of product per 3-4 square metres of cross-cut end grains of timber. Allow to dry before applying a second coat, usually 24 hours. Product appears blue in can but green when dry. Allow 3 days before overcoating with a suitable Ronseal Decking Product. 750ml will preserve and protect the end grains of even the largest decks.\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCLEAN UP\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eRemove as much product as possible from equipment before cleaning. Clean all equipment immediately after use with a detergent and water.\u003c\/p\u003e\u003cul\u003e\u003cli\u003eKEY INFORMATION\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eUsage areas: All types of timber end grain.\u003cbr\u003eCoverage: Approximately 3-4 metres squared per litre.\u003cbr\u003eDry Times: Recoat after 24 hours.\u003cbr\u003eNumber of coats: 2\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eWHAT IS RONSEAL DECKING END GRAIN PRESERVER?\u003cbr\u003eEnd Grain is vulnerable to water ingress and attack by wood rotting fungi and wood destroying insects. Ronseal Decking End Grain Preserver is a deep, penetrating preserver specially formulated to protect existing previously supplied or freshly cut timber end grain. It's unique formulation completely preserves and protects even the most porous end grains.\u003c\/p\u003e\u003cp\u003eWHY CHOOSE RONSEAL DECKING END GRAIN PRESERVER?\u003cbr\u003eRonseal Decking End Grain Preserver is a high performance preserver that is specially formulated to protect decking end grains from wood rotting fungi and wood destroying insects. It can be overcoated or stained with suitable Ronseal Decking Products and it is suitable for all types of hardwood and soft timber.\u003c\/p\u003e\u003cp\u003eWHERE CAN IT BE USED?\u003cbr\u003eRonseal Decking End Grain Preserver is suitable for all types of hardwood and softwood decking timber, including pre-treated, pressure treated and preservative impregnated timber.\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":46416980377888,"sku":"183","price":10.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0789\/7051\/9840\/products\/decking-end-grain-preserver.jpg?v=1692818684"},{"product_id":"ronseal-decking-stain-2-5ltr-country-oak","title":"2.5 Litre Country Oak Ronseal Decking Stain","description":"\u003cp\u003eRonseal Decking Stain is a hardwearing, scuff resistant formula that colours and protects to provide a tough and durable natural finish. It resists cracking, peeling and blistering and withstands foot traffic. Rain proof in 90mins so your deck's back in action in no time.\u003c\/p\u003e\u003cp\u003eIdeal for colouring and protecting all hardwood and softwood decks.\u003c\/p\u003e\u003cp\u003eTwo coats are recommended.\u003c\/p\u003e\u003cp\u003eAreas of use: Hardwood and soft wood decking.\u003cbr\u003eApprox coverage: 12 m2 covered per litre.\u003cbr\u003eApprox number of coats: 2.\u003cbr\u003eFinish: Semi Translucent Matt.\u003cbr\u003eApplication: Brush.\u003cbr\u003eDrying time approx: 90 mins.\u003cbr\u003eProtection level: High.\u003c\/p\u003e\u003cp\u003eCOVERAGE\u003cbr\u003eA 2.5 litre pack is normally sufficient to coat; \u003cbr\u003e\u003cbr\u003eRough sawn boards two coats ~ 10-15 square metres. \u003cbr\u003eSmooth planed boards two coats ~ 15-20 square metres. \u003cbr\u003e\u003cbr\u003eTwo coats are recommended. Coverage may be reduced on deeply profiled boards.\u003c\/p\u003e\u003cbr\u003e\u003cul\u003e\u003cli\u003ePREPARATION \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cspan\u003eOld decking: Use Ronseal Decking Cleaner and Reviver to remove any dust, grease, oil, mildew, algae and other contaminants. Remove any loose, flaking or peeling coatings. For best results and to avoid patchiness remove all previous coatings. Ensure the ends are adequately protected using Ronseal Decking End Grain Preserver. \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eNew wood: New decking timber should be allowed to weather naturally (usually 6 months) to ensure any pre-treatment has sufficiently eroded, allowing penetration and adhesion of the stain. Clean the decking with Ronseal Decking Cleaner and Reviver, using a scrubbing brush to open the pores of the wood and remove any contamination from the manufacture of the decking. Then rinse thoroughly with cold water, ideally using a pressure washer and allow to dry completely before overcoating. Test effectiveness of cleaning by splashing the deck with water, if beading occurs, re-clean. Retest prior to applying Decking Stain. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAPPLICATION \u003c\/li\u003e\u003c\/ul\u003e\u003col\u003e\n\u003cli\u003eEnsure decking is thoroughly dry. Do not apply in damp conditions or when rain is likely before product has dried. Do not apply below 10 degrees C. \u003c\/li\u003e\n\u003cli\u003eStir thoroughly before and during use. Do not dilute. \u003c\/li\u003e\n\u003cli\u003eUse a good quality wide brush designed for the application of water based finishes. Apply liberally to ensure that even penetration and complete coverage of the decking is achieved. Ensure the leading edge is distributed evenly. Always work along the grain. \u003c\/li\u003e\n\u003cli\u003eWhen applying to deck boards, treat 3-4 boards at a time to avoid overlap marks. \u003c\/li\u003e\n\u003cli\u003eWe recommend 2 coats, however, to achieve a deeper colour you can apply a third coat. For maximum protection apply to all sides and ends of the decking. \u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCLEAN UP \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cspan\u003eRemove as much decking stain as possible from brushes before cleaning. Clean brushes with water and detergent. Do not empty into drains or watercourses. Some local authorities have special facilities for the disposal of waste coatings. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eMAINTENANCE \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cspan\u003eDecking treated with Ronseal Decking Stain can be cleaned using Ronseal Decking Cleaner and Reviver. Inspect the coating on an annual basis and re-coat when necessary.\u003c\/span\u003e\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":46416980934944,"sku":"184","price":32.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0789\/7051\/9840\/products\/decking-stain_4.png?v=1692818591"},{"product_id":"ronseal-decking-stain-2-5ltr-golden-cedar","title":"2.5 Litre Cedar Ronseal Decking Stain","description":"\u003cp\u003eRonseal Decking Stain is a hardwearing, scuff resistant formula that colours and protects to provide a tough and durable natural finish. It resists cracking, peeling and blistering and withstands foot traffic. Rain proof in 90mins so your deck's back in action in no time.\u003c\/p\u003e\u003cp\u003eIdeal for colouring and protecting all hardwood and softwood decks.\u003c\/p\u003e\u003cp\u003eTwo coats are recommended.\u003c\/p\u003e\u003cp\u003eAreas of use: Hardwood and soft wood decking.\u003cbr\u003eApprox coverage: 12 m2 covered per litre.\u003cbr\u003eApprox number of coats: 2.\u003cbr\u003eFinish: Semi Translucent Matt.\u003cbr\u003eApplication: Brush.\u003cbr\u003eDrying time approx: 90 mins.\u003cbr\u003eProtection level: High.\u003c\/p\u003e\u003cp\u003eCOVERAGE\u003cbr\u003eA 2.5 litre pack is normally sufficient to coat; \u003cbr\u003e\u003cbr\u003eRough sawn boards two coats ~ 10-15 square metres. \u003cbr\u003eSmooth planed boards two coats ~ 15-20 square metres. \u003cbr\u003e\u003cbr\u003eTwo coats are recommended. Coverage may be reduced on deeply profiled boards.\u003c\/p\u003e\u003cbr\u003e\u003cul\u003e\u003cli\u003ePREPARATION \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cspan\u003eOld decking: Use Ronseal Decking Cleaner and Reviver to remove any dust, grease, oil, mildew, algae and other contaminants. Remove any loose, flaking or peeling coatings. For best results and to avoid patchiness remove all previous coatings. Ensure the ends are adequately protected using Ronseal Decking End Grain Preserver. \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eNew wood: New decking timber should be allowed to weather naturally (usually 6 months) to ensure any pre-treatment has sufficiently eroded, allowing penetration and adhesion of the stain. Clean the decking with Ronseal Decking Cleaner and Reviver, using a scrubbing brush to open the pores of the wood and remove any contamination from the manufacture of the decking. Then rinse thoroughly with cold water, ideally using a pressure washer and allow to dry completely before overcoating. Test effectiveness of cleaning by splashing the deck with water, if beading occurs, re-clean. Retest prior to applying Decking Stain. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAPPLICATION \u003c\/li\u003e\u003c\/ul\u003e\u003col\u003e\n\u003cli\u003eEnsure decking is thoroughly dry. Do not apply in damp conditions or when rain is likely before product has dried. Do not apply below 10 degrees C. \u003c\/li\u003e\n\u003cli\u003eStir thoroughly before and during use. Do not dilute. \u003c\/li\u003e\n\u003cli\u003eUse a good quality wide brush designed for the application of water based finishes. Apply liberally to ensure that even penetration and complete coverage of the decking is achieved. Ensure the leading edge is distributed evenly. Always work along the grain. \u003c\/li\u003e\n\u003cli\u003eWhen applying to deck boards, treat 3-4 boards at a time to avoid overlap marks. \u003c\/li\u003e\n\u003cli\u003eWe recommend 2 coats, however, to achieve a deeper colour you can apply a third coat. For maximum protection apply to all sides and ends of the decking. \u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCLEAN UP \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cspan\u003eRemove as much decking stain as possible from brushes before cleaning. Clean brushes with water and detergent. Do not empty into drains or watercourses. Some local authorities have special facilities for the disposal of waste coatings. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eMAINTENANCE \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cspan\u003eDecking treated with Ronseal Decking Stain can be cleaned using Ronseal Decking Cleaner and Reviver. Inspect the coating on an annual basis and re-coat when necessary.\u003c\/span\u003e\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":46416981000480,"sku":"185","price":32.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0789\/7051\/9840\/products\/decking-stain_4_1.png?v=1692818593"},{"product_id":"ronseal-decking-stain-2-5ltr-slate","title":"2.5 Litre Slate Ronseal Decking Stain","description":"\u003cp\u003eRonseal Decking Stain is a hardwearing, scuff resistant formula that colours and protects to provide a tough and durable natural finish. It resists cracking, peeling and blistering and withstands foot traffic. Rain proof in 90mins so your deck's back in action in no time.\u003c\/p\u003e\u003cp\u003eIdeal for colouring and protecting all hardwood and softwood decks.\u003c\/p\u003e\u003cp\u003eTwo coats are recommended.\u003c\/p\u003e\u003cp\u003eAreas of use: Hardwood and soft wood decking.\u003cbr\u003eApprox coverage: 12 m2 covered per litre.\u003cbr\u003eApprox number of coats: 2.\u003cbr\u003eFinish: Semi Translucent Matt.\u003cbr\u003eApplication: Brush.\u003cbr\u003eDrying time approx: 90 mins.\u003cbr\u003eProtection level: High.\u003c\/p\u003e\u003cp\u003eCOVERAGE\u003cbr\u003eA 2.5 litre pack is normally sufficient to coat; \u003cbr\u003e\u003cbr\u003eRough sawn boards two coats ~ 10-15 square metres. \u003cbr\u003eSmooth planed boards two coats ~ 15-20 square metres. \u003cbr\u003e\u003cbr\u003eTwo coats are recommended. Coverage may be reduced on deeply profiled boards.\u003c\/p\u003e\u003cbr\u003e\u003cul\u003e\u003cli\u003ePREPARATION \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cspan\u003eOld decking: Use Ronseal Decking Cleaner and Reviver to remove any dust, grease, oil, mildew, algae and other contaminants. Remove any loose, flaking or peeling coatings. For best results and to avoid patchiness remove all previous coatings. Ensure the ends are adequately protected using Ronseal Decking End Grain Preserver. \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eNew wood: New decking timber should be allowed to weather naturally (usually 6 months) to ensure any pre-treatment has sufficiently eroded, allowing penetration and adhesion of the stain. Clean the decking with Ronseal Decking Cleaner and Reviver, using a scrubbing brush to open the pores of the wood and remove any contamination from the manufacture of the decking. Then rinse thoroughly with cold water, ideally using a pressure washer and allow to dry completely before overcoating. Test effectiveness of cleaning by splashing the deck with water, if beading occurs, re-clean. Retest prior to applying Decking Stain. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAPPLICATION \u003c\/li\u003e\u003c\/ul\u003e\u003col\u003e\n\u003cli\u003eEnsure decking is thoroughly dry. Do not apply in damp conditions or when rain is likely before product has dried. Do not apply below 10 degrees C. \u003c\/li\u003e\n\u003cli\u003eStir thoroughly before and during use. Do not dilute. \u003c\/li\u003e\n\u003cli\u003eUse a good quality wide brush designed for the application of water based finishes. Apply liberally to ensure that even penetration and complete coverage of the decking is achieved. Ensure the leading edge is distributed evenly. Always work along the grain. \u003c\/li\u003e\n\u003cli\u003eWhen applying to deck boards, treat 3-4 boards at a time to avoid overlap marks. \u003c\/li\u003e\n\u003cli\u003eWe recommend 2 coats, however, to achieve a deeper colour you can apply a third coat. For maximum protection apply to all sides and ends of the decking. \u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCLEAN UP \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cspan\u003eRemove as much decking stain as possible from brushes before cleaning. Clean brushes with water and detergent. Do not empty into drains or watercourses. Some local authorities have special facilities for the disposal of waste coatings. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eMAINTENANCE \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cspan\u003eDecking treated with Ronseal Decking Stain can be cleaned using Ronseal Decking Cleaner and Reviver. Inspect the coating on an annual basis and re-coat when necessary.\u003c\/span\u003e\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":46416981066016,"sku":"186","price":32.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0789\/7051\/9840\/products\/decking-stain_4_2.png?v=1692818595"},{"product_id":"ronseal-decking-stain-2-5ltr-stone-grey","title":"2.5 Litre Stone Grey Ronseal Decking Stain","description":"\u003cp\u003eRonseal Decking Stain is a hardwearing, scuff resistant formula that colours and protects to provide a tough and durable natural finish. It resists cracking, peeling and blistering and withstands foot traffic. Rain proof in 90mins so your deck's back in action in no time.\u003c\/p\u003e\u003cp\u003eIdeal for colouring and protecting all hardwood and softwood decks.\u003c\/p\u003e\u003cp\u003eTwo coats are recommended.\u003c\/p\u003e\u003cp\u003eAreas of use: Hardwood and soft wood decking.\u003cbr\u003eApprox coverage: 12 m2 covered per litre.\u003cbr\u003eApprox number of coats: 2.\u003cbr\u003eFinish: Semi Translucent Matt.\u003cbr\u003eApplication: Brush.\u003cbr\u003eDrying time approx: 90 mins.\u003cbr\u003eProtection level: High.\u003c\/p\u003e\u003cp\u003eCOVERAGE\u003cbr\u003eA 2.5 litre pack is normally sufficient to coat; \u003cbr\u003e\u003cbr\u003eRough sawn boards two coats ~ 10-15 square metres. \u003cbr\u003eSmooth planed boards two coats ~ 15-20 square metres. \u003cbr\u003e\u003cbr\u003eTwo coats are recommended. Coverage may be reduced on deeply profiled boards.\u003c\/p\u003e\u003cbr\u003e\u003cul\u003e\u003cli\u003ePREPARATION \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cspan\u003eOld decking: Use Ronseal Decking Cleaner and Reviver to remove any dust, grease, oil, mildew, algae and other contaminants. Remove any loose, flaking or peeling coatings. For best results and to avoid patchiness remove all previous coatings. Ensure the ends are adequately protected using Ronseal Decking End Grain Preserver. \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eNew wood: New decking timber should be allowed to weather naturally (usually 6 months) to ensure any pre-treatment has sufficiently eroded, allowing penetration and adhesion of the stain. Clean the decking with Ronseal Decking Cleaner and Reviver, using a scrubbing brush to open the pores of the wood and remove any contamination from the manufacture of the decking. Then rinse thoroughly with cold water, ideally using a pressure washer and allow to dry completely before overcoating. Test effectiveness of cleaning by splashing the deck with water, if beading occurs, re-clean. Retest prior to applying Decking Stain. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAPPLICATION \u003c\/li\u003e\u003c\/ul\u003e\u003col\u003e\n\u003cli\u003eEnsure decking is thoroughly dry. Do not apply in damp conditions or when rain is likely before product has dried. Do not apply below 10 degrees C. \u003c\/li\u003e\n\u003cli\u003eStir thoroughly before and during use. Do not dilute. \u003c\/li\u003e\n\u003cli\u003eUse a good quality wide brush designed for the application of water based finishes. Apply liberally to ensure that even penetration and complete coverage of the decking is achieved. Ensure the leading edge is distributed evenly. Always work along the grain. \u003c\/li\u003e\n\u003cli\u003eWhen applying to deck boards, treat 3-4 boards at a time to avoid overlap marks. \u003c\/li\u003e\n\u003cli\u003eWe recommend 2 coats, however, to achieve a deeper colour you can apply a third coat. For maximum protection apply to all sides and ends of the decking. \u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCLEAN UP \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cspan\u003eRemove as much decking stain as possible from brushes before cleaning. Clean brushes with water and detergent. Do not empty into drains or watercourses. Some local authorities have special facilities for the disposal of waste coatings. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eMAINTENANCE \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cspan\u003eDecking treated with Ronseal Decking Stain can be cleaned using Ronseal Decking Cleaner and Reviver. Inspect the coating on an annual basis and re-coat when necessary.\u003c\/span\u003e\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":46416981492000,"sku":"187","price":32.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0789\/7051\/9840\/products\/decking-stain_4_3.png?v=1692818597"},{"product_id":"ronseal-decking-stain-2-5ltr-charcoal","title":"2.5 Litre Charcoal Ronseal Decking Stain","description":"\u003cp\u003eRonseal Decking Stain is a hardwearing, scuff resistant formula that colours and protects to provide a tough and durable natural finish. It resists cracking, peeling and blistering and withstands foot traffic. Rain proof in 90mins so your deck's back in action in no time.\u003c\/p\u003e\u003cp\u003eIdeal for colouring and protecting all hardwood and softwood decks.\u003c\/p\u003e\u003cp\u003eTwo coats are recommended.\u003c\/p\u003e\u003cp\u003eAreas of use: Hardwood and soft wood decking.\u003cbr\u003eApprox coverage: 12 m2 covered per litre.\u003cbr\u003eApprox number of coats: 2.\u003cbr\u003eFinish: Semi Translucent Matt.\u003cbr\u003eApplication: Brush.\u003cbr\u003eDrying time approx: 90 mins.\u003cbr\u003eProtection level: High.\u003c\/p\u003e\u003cp\u003eCOVERAGE\u003cbr\u003eA 2.5 litre pack is normally sufficient to coat; \u003cbr\u003e\u003cbr\u003eRough sawn boards two coats ~ 10-15 square metres. \u003cbr\u003eSmooth planed boards two coats ~ 15-20 square metres. \u003cbr\u003e\u003cbr\u003eTwo coats are recommended. Coverage may be reduced on deeply profiled boards.\u003c\/p\u003e\u003cbr\u003e\u003cul\u003e\u003cli\u003ePREPARATION \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cspan\u003eOld decking: Use Ronseal Decking Cleaner and Reviver to remove any dust, grease, oil, mildew, algae and other contaminants. Remove any loose, flaking or peeling coatings. For best results and to avoid patchiness remove all previous coatings. Ensure the ends are adequately protected using Ronseal Decking End Grain Preserver. \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eNew wood: New decking timber should be allowed to weather naturally (usually 6 months) to ensure any pre-treatment has sufficiently eroded, allowing penetration and adhesion of the stain. Clean the decking with Ronseal Decking Cleaner and Reviver, using a scrubbing brush to open the pores of the wood and remove any contamination from the manufacture of the decking. Then rinse thoroughly with cold water, ideally using a pressure washer and allow to dry completely before overcoating. Test effectiveness of cleaning by splashing the deck with water, if beading occurs, re-clean. Retest prior to applying Decking Stain. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAPPLICATION \u003c\/li\u003e\u003c\/ul\u003e\u003col\u003e\n\u003cli\u003eEnsure decking is thoroughly dry. Do not apply in damp conditions or when rain is likely before product has dried. Do not apply below 10 degrees C. \u003c\/li\u003e\n\u003cli\u003eStir thoroughly before and during use. Do not dilute. \u003c\/li\u003e\n\u003cli\u003eUse a good quality wide brush designed for the application of water based finishes. Apply liberally to ensure that even penetration and complete coverage of the decking is achieved. Ensure the leading edge is distributed evenly. Always work along the grain. \u003c\/li\u003e\n\u003cli\u003eWhen applying to deck boards, treat 3-4 boards at a time to avoid overlap marks. \u003c\/li\u003e\n\u003cli\u003eWe recommend 2 coats, however, to achieve a deeper colour you can apply a third coat. For maximum protection apply to all sides and ends of the decking. \u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCLEAN UP \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cspan\u003eRemove as much decking stain as possible from brushes before cleaning. Clean brushes with water and detergent. Do not empty into drains or watercourses. Some local authorities have special facilities for the disposal of waste coatings. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eMAINTENANCE \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cspan\u003eDecking treated with Ronseal Decking Stain can be cleaned using Ronseal Decking Cleaner and Reviver. Inspect the coating on an annual basis and re-coat when necessary.\u003c\/span\u003e\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":46416981557536,"sku":"188","price":32.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0789\/7051\/9840\/products\/decking-stain_4_4.png?v=1692818686"},{"product_id":"johnstones-shed-and-fence-treatment-50ltr-dark-oak","title":"5 Litre Dark Oak Johnstones Shed \u0026 Fence Treatment","description":"\u003cul\u003e\u003cli\u003ePREPARATION \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eEnsure all timber is clean, dry and free from surface coatings, such as paint, varnish or polish. If the timber is affected by mould, lichen, algae or moss, use a fungicidal pre-treatment prior to application of Shed and Fence Treatment. \u003cbr\u003eFor additional information and free Johnstone's Trade datasheets call 01924 354000 or visit www.johnstone's-paint.co.uk. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAPPLICATION \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eStir Shed \u0026amp; Fence Treatment well before and during use. Whilst applying ensure gloves are worn to avoid staining hands. Brush liberally and evenly onto exposed surfaces. Wash off any splashes on plants otherwise the foliage may be stained. One coat is required on sound new timber. Old weathered timber or porous timber may require two coats. Do not apply to wet wood, or in temperatures below 5 degrees Centigrade or when rain is imminent. Wear a suitable face mask when creating dust. Special precautions should be taken during surface preparation of pre-1960's paint surfaces over wood and metal as they may contain harmful lead. PLEASE NOTE: The final colour will depend on the colour and porosity of the surface. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCOVERAGE \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eShed \u0026amp; Fence Treatment will cover approximately 6 square metres per litre on rough sawn timber and approximately 12 square metres per litre on planed timber. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDRYING TIME \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eAllow 2-4 hours between coats. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAFTER USE \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eRemove as much product as possible from brushes before cleaning. Brushes should be washed immediately after use in warm soapy water and rinse thoroughly. Replace lid firmly. Some local authorities have special facilities for the disposal of waste coatings. Do not empty product into drains or watercourses. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eGENERAL INFORMATION \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eTo avoid the risk of spillage, always store and transport in a secure upright position. \u003cbr\u003ePROTECT FROM FROST\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eJOHNSTONE'S SHED \u0026amp; FENCE TREATMENT is formulated to be water repellent and resist fading. Suitable for above ground rough sawn timber, this special formulation protects exterior timber from the suns harmful UV rays.\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":46416981590304,"sku":"deck0","price":11.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0789\/7051\/9840\/products\/1358431043-9224.jpg?v=1692818688"},{"product_id":"johnstones-shed-and-fence-treatment-50ltr-dark-chestnut","title":"5 Litre Dark Chestnut Johnstones Shed \u0026 Fence Treatment","description":"\u003cul\u003e\u003cli\u003ePREPARATION \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eEnsure all timber is clean, dry and free from surface coatings, such as paint, varnish or polish. If the timber is affected by mould, lichen, algae or moss, use a fungicidal pre-treatment prior to application of Shed and Fence Treatment. \u003cbr\u003eFor additional information and free Johnstone's Trade datasheets call 01924 354000 or visit www.johnstone's-paint.co.uk. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAPPLICATION \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eStir Shed \u0026amp; Fence Treatment well before and during use. Whilst applying ensure gloves are worn to avoid staining hands. Brush liberally and evenly onto exposed surfaces. Wash off any splashes on plants otherwise the foliage may be stained. One coat is required on sound new timber. Old weathered timber or porous timber may require two coats. Do not apply to wet wood, or in temperatures below 5 degrees Centigrade or when rain is imminent. Wear a suitable face mask when creating dust. Special precautions should be taken during surface preparation of pre-1960's paint surfaces over wood and metal as they may contain harmful lead. PLEASE NOTE: The final colour will depend on the colour and porosity of the surface. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCOVERAGE \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eShed \u0026amp; Fence Treatment will cover approximately 6 square metres per litre on rough sawn timber and approximately 12 square metres per litre on planed timber. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDRYING TIME \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eAllow 2-4 hours between coats. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAFTER USE \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eRemove as much product as possible from brushes before cleaning. Brushes should be washed immediately after use in warm soapy water and rinse thoroughly. Replace lid firmly. Some local authorities have special facilities for the disposal of waste coatings. Do not empty product into drains or watercourses. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eGENERAL INFORMATION \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eTo avoid the risk of spillage, always store and transport in a secure upright position. \u003cbr\u003ePROTECT FROM FROST\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eJOHNSTONE'S SHED \u0026amp; FENCE TREATMENT is formulated to be water repellent and resist fading. Suitable for above ground rough sawn timber, this special formulation protects exterior timber from the suns harmful UV rays.\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":46416981655840,"sku":"deck1","price":11.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0789\/7051\/9840\/products\/1358431193-1686_1.jpg?v=1692818690"},{"product_id":"johnstones-shed-and-fence-treatment-50ltr-green","title":"5 Litre Green Johnstones Shed \u0026 Fence Treatment","description":"\u003cul\u003e\u003cli\u003ePREPARATION \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eEnsure all timber is clean, dry and free from surface coatings, such as paint, varnish or polish. If the timber is affected by mould, lichen, algae or moss, use a fungicidal pre-treatment prior to application of Shed and Fence Treatment. \u003cbr\u003eFor additional information and free Johnstone's Trade datasheets call 01924 354000 or visit www.johnstone's-paint.co.uk. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAPPLICATION \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eStir Shed \u0026amp; Fence Treatment well before and during use. Whilst applying ensure gloves are worn to avoid staining hands. Brush liberally and evenly onto exposed surfaces. Wash off any splashes on plants otherwise the foliage may be stained. One coat is required on sound new timber. Old weathered timber or porous timber may require two coats. Do not apply to wet wood, or in temperatures below 5 degrees Centigrade or when rain is imminent. Wear a suitable face mask when creating dust. Special precautions should be taken during surface preparation of pre-1960's paint surfaces over wood and metal as they may contain harmful lead. PLEASE NOTE: The final colour will depend on the colour and porosity of the surface. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCOVERAGE \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eShed \u0026amp; Fence Treatment will cover approximately 6 square metres per litre on rough sawn timber and approximately 12 square metres per litre on planed timber. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDRYING TIME \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eAllow 2-4 hours between coats. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAFTER USE \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eRemove as much product as possible from brushes before cleaning. Brushes should be washed immediately after use in warm soapy water and rinse thoroughly. Replace lid firmly. Some local authorities have special facilities for the disposal of waste coatings. Do not empty product into drains or watercourses. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eGENERAL INFORMATION \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eTo avoid the risk of spillage, always store and transport in a secure upright position. \u003cbr\u003ePROTECT FROM FROST\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eJOHNSTONE'S SHED \u0026amp; FENCE TREATMENT is formulated to be water repellent and resist fading. Suitable for above ground rough sawn timber, this special formulation protects exterior timber from the suns harmful UV rays.\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":46416981721376,"sku":"deck2","price":11.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0789\/7051\/9840\/products\/1358431193-1686.jpg?v=1692818692"},{"product_id":"johnstones-shed-and-fence-treatment-50ltr-rustic-red","title":"5 Litre Rustic Red Johnstones Shed \u0026 Fence Treatment","description":"\u003cul\u003e\u003cli\u003ePREPARATION \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eEnsure all timber is clean, dry and free from surface coatings, such as paint, varnish or polish. If the timber is affected by mould, lichen, algae or moss, use a fungicidal pre-treatment prior to application of Shed and Fence Treatment. \u003cbr\u003eFor additional information and free Johnstone's Trade datasheets call 01924 354000 or visit www.johnstone's-paint.co.uk. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAPPLICATION \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eStir Shed \u0026amp; Fence Treatment well before and during use. Whilst applying ensure gloves are worn to avoid staining hands. Brush liberally and evenly onto exposed surfaces. Wash off any splashes on plants otherwise the foliage may be stained. One coat is required on sound new timber. Old weathered timber or porous timber may require two coats. Do not apply to wet wood, or in temperatures below 5 degrees Centigrade or when rain is imminent. Wear a suitable face mask when creating dust. Special precautions should be taken during surface preparation of pre-1960's paint surfaces over wood and metal as they may contain harmful lead. PLEASE NOTE: The final colour will depend on the colour and porosity of the surface. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCOVERAGE \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eShed \u0026amp; Fence Treatment will cover approximately 6 square metres per litre on rough sawn timber and approximately 12 square metres per litre on planed timber. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDRYING TIME \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eAllow 2-4 hours between coats. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAFTER USE \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eRemove as much product as possible from brushes before cleaning. Brushes should be washed immediately after use in warm soapy water and rinse thoroughly. Replace lid firmly. Some local authorities have special facilities for the disposal of waste coatings. Do not empty product into drains or watercourses. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eGENERAL INFORMATION \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eTo avoid the risk of spillage, always store and transport in a secure upright position. \u003cbr\u003ePROTECT FROM FROST\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eJOHNSTONE'S SHED \u0026amp; FENCE TREATMENT is formulated to be water repellent and resist fading. Suitable for above ground rough sawn timber, this special formulation protects exterior timber from the suns harmful UV rays.\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":46416982016288,"sku":"deck3","price":11.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0789\/7051\/9840\/products\/1358431265-6282.jpg?v=1692818599"},{"product_id":"johnstones-shed-and-fence-treatment-50ltr-light-brown","title":"5 Litre Light Brown Johnstones Shed \u0026 Fence Treatment","description":"\u003cul\u003e\u003cli\u003ePREPARATION \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eEnsure all timber is clean, dry and free from surface coatings, such as paint, varnish or polish. If the timber is affected by mould, lichen, algae or moss, use a fungicidal pre-treatment prior to application of Shed and Fence Treatment. \u003cbr\u003eFor additional information and free Johnstone's Trade datasheets call 01924 354000 or visit www.johnstone's-paint.co.uk. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAPPLICATION \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eStir Shed \u0026amp; Fence Treatment well before and during use. Whilst applying ensure gloves are worn to avoid staining hands. Brush liberally and evenly onto exposed surfaces. Wash off any splashes on plants otherwise the foliage may be stained. One coat is required on sound new timber. Old weathered timber or porous timber may require two coats. Do not apply to wet wood, or in temperatures below 5 degrees Centigrade or when rain is imminent. Wear a suitable face mask when creating dust. Special precautions should be taken during surface preparation of pre-1960's paint surfaces over wood and metal as they may contain harmful lead. PLEASE NOTE: The final colour will depend on the colour and porosity of the surface. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCOVERAGE \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eShed \u0026amp; Fence Treatment will cover approximately 6 square metres per litre on rough sawn timber and approximately 12 square metres per litre on planed timber. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDRYING TIME \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eAllow 2-4 hours between coats. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAFTER USE \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eRemove as much product as possible from brushes before cleaning. Brushes should be washed immediately after use in warm soapy water and rinse thoroughly. Replace lid firmly. Some local authorities have special facilities for the disposal of waste coatings. Do not empty product into drains or watercourses. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eGENERAL INFORMATION \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eTo avoid the risk of spillage, always store and transport in a secure upright position. \u003cbr\u003ePROTECT FROM FROST\u003c\/p\u003e\u003cbr\u003e\u003cp\u003eJOHNSTONE'S SHED \u0026amp; FENCE TREATMENT is formulated to be water repellent and resist fading. Suitable for above ground rough sawn timber, this special formulation protects exterior timber from the suns harmful UV rays.\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":46416982835488,"sku":"deck4","price":11.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0789\/7051\/9840\/products\/1358431118-1182.jpg?v=1692818601"},{"product_id":"2-5-litre-dark-oak-ronseal-decking-stain","title":"2.5 Litre Dark Oak Ronseal Decking Stain","description":"\u003cp\u003eRonseal Decking Stain is a hardwearing, scuff resistant formula that colours and protects to provide a tough and durable natural finish. It resists cracking, peeling and blistering and withstands foot traffic. Rain proof in 90mins so your deck's back in action in no time.\u003c\/p\u003e\u003cp\u003eIdeal for colouring and protecting all hardwood and softwood decks.\u003c\/p\u003e\u003cp\u003eTwo coats are recommended.\u003c\/p\u003e\u003cp\u003eAreas of use: Hardwood and soft wood decking.\u003cbr\u003eApprox coverage: 12 m2 covered per litre.\u003cbr\u003eApprox number of coats: 2.\u003cbr\u003eFinish: Semi Translucent Matt.\u003cbr\u003eApplication: Brush.\u003cbr\u003eDrying time approx: 90 mins.\u003cbr\u003eProtection level: High.\u003c\/p\u003e\u003cp\u003eCOVERAGE\u003cbr\u003eA 2.5 litre pack is normally sufficient to coat; \u003cbr\u003e\u003cbr\u003eRough sawn boards two coats ~ 10-15 square metres. \u003cbr\u003eSmooth planed boards two coats ~ 15-20 square metres. \u003cbr\u003e\u003cbr\u003eTwo coats are recommended. Coverage may be reduced on deeply profiled boards.\u003c\/p\u003e\u003cbr\u003e\u003cul\u003e\u003cli\u003ePREPARATION \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cspan\u003eOld decking: Use Ronseal Decking Cleaner and Reviver to remove any dust, grease, oil, mildew, algae and other contaminants. Remove any loose, flaking or peeling coatings. For best results and to avoid patchiness remove all previous coatings. Ensure the ends are adequately protected using Ronseal Decking End Grain Preserver. \u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eNew wood: New decking timber should be allowed to weather naturally (usually 6 months) to ensure any pre-treatment has sufficiently eroded, allowing penetration and adhesion of the stain. Clean the decking with Ronseal Decking Cleaner and Reviver, using a scrubbing brush to open the pores of the wood and remove any contamination from the manufacture of the decking. Then rinse thoroughly with cold water, ideally using a pressure washer and allow to dry completely before overcoating. Test effectiveness of cleaning by splashing the deck with water, if beading occurs, re-clean. Retest prior to applying Decking Stain. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eAPPLICATION \u003c\/li\u003e\u003c\/ul\u003e\u003col\u003e\n\u003cli\u003eEnsure decking is thoroughly dry. Do not apply in damp conditions or when rain is likely before product has dried. Do not apply below 10 degrees C. \u003c\/li\u003e\n\u003cli\u003eStir thoroughly before and during use. Do not dilute. \u003c\/li\u003e\n\u003cli\u003eUse a good quality wide brush designed for the application of water based finishes. Apply liberally to ensure that even penetration and complete coverage of the decking is achieved. Ensure the leading edge is distributed evenly. Always work along the grain. \u003c\/li\u003e\n\u003cli\u003eWhen applying to deck boards, treat 3-4 boards at a time to avoid overlap marks. \u003c\/li\u003e\n\u003cli\u003eWe recommend 2 coats, however, to achieve a deeper colour you can apply a third coat. For maximum protection apply to all sides and ends of the decking. \u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eCLEAN UP \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cspan\u003eRemove as much decking stain as possible from brushes before cleaning. Clean brushes with water and detergent. Do not empty into drains or watercourses. Some local authorities have special facilities for the disposal of waste coatings. \u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eMAINTENANCE \u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cspan\u003eDecking treated with Ronseal Decking Stain can be cleaned using Ronseal Decking Cleaner and Reviver. Inspect the coating on an annual basis and re-coat when necessary.\u003c\/span\u003e\u003c\/p\u003e","brand":"vendor-unknown","offers":[{"title":"Default Title","offer_id":56541608771964,"sku":"184","price":32.3,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0789\/7051\/9840\/products\/decking-stain_4.png?v=1692818591"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0789\/7051\/9840\/collections\/93c9c2dfe8dc76f898bd9fae8ebec025_b322c5f9-c599-44d9-9c90-5c338fcd1621.jpg?v=1692814933","url":"https:\/\/formbytimber.co.uk\/collections\/wood-preservatives-enhancement-5.oembed?page=2","provider":"Formby Timber Supplies Ltd","version":"1.0","type":"link"}