WE'RE SORRY BUT WE CAN'T CURRENTLY SHIP THIS PRODUCT OUTSIDE OF THE NORTHWEST.

LANGLOW UNIVERSAL wood preserver can be applied by brush, spray or dipping as follows: To treat DRY ROT and WET ROT, remove cause of dampness and affected wood at least 1 metre beyond attack. Apply 2-3 liberal coats to all remaining and replacement wood. To treat WOOD BORING INSECT attack, apply 2-3 liberal coats and inject into flight holes in wood. To protect sound wood against future attack, apply 3 liberal coats or dip wood for a few minutes to achieve maximum penetration. For wood in ground, such as fence posts, soak for at least 1 hour. Wood treated with Langlow Universal is water repellent when dry.

DIRECTIONS FOR USE OF LANGLOW WOOD PRESERVER PRODUCTS
Agitate the contents of the can thoroughly before use and ensure that the wood to be treated is clean, dry and free from surface coatings such as paint, polish, and bark, etc. End grain should be treated to saturation. Allow wood to dry between application coats. After treatment, wood when dry can be painted, varnished or polished. Coverage depends upon surface finish, porosity of substrate, etc., but as a guide should be approximately 4-6 metres squared per litre. Clean brushes, spray equipment, etc. with Langlow White Spirit.

LANGLOW CLEAR, RED CEDAR, GOLDEN BROWN, PALE GREEN, GREEN and DARK BROWN wood preservers can be applied by brush, spray, or dipping whereby 2 coats should be applied to refusal in each case.

1 Litre Universal Langlow Wood Preserver